|
|
 Concrete Coring Equipment
With Vacuum
Collection System |
Usually when you add water to a drilling system, it gets quite messy.
Concrete coring needs water to cool the diamond blade and flush-out
waste. In an effort to make this as neat as possible, we use a water
collection system that surrounds the unit and vacuums up any spillage.
This means there is no mess to worry about. Cores are available from
3-inch to 10-inch diameter.
For simple jobs, a 3-inch hole is all that is required prior to advancing
a 2-inch split-spoon. In some situations you may want to install a
steel flush-mount cover for a monitoring well or hand excavate a bit
for unknowns, in which case either an 8 or 10-inch core is used.
All floors are repaired with high-strength concrete to ensure no loss
of slab integrity.
Visit our photo gallery page for more pictures.
|
|
|
